PA Horn Driver [message #7967] |
Thu, 04 January 2007 09:04 |
C4ster
Messages: 686 Registered: June 2001 Location: Mukwonago, WI (Milwaukee...
|
Senior Member |
|
|
Hi guys, on Ebay there is an Atlas horn driver. I need one and I will be bidding, but the specs of the unit as stated seem wrong. From the auction, "One only Atlas SA-422 midrange horn driver removed from an unknown model older Cerwin Vega PA cabinet. Perfect operation, excellent condition, no problems! No dings, dents, diaphragm distortion, etc. These were used in products made by C/V, Kustom, and others. 1-3/8" x 18 thread, 300 Hz - 5KHz range, 6.8 ohm DCR, 4.6 lbs unpacked". Is this thing a mid range or high frequency horn? Or am I missing it entirely? It looks like the same 1" throat driver that is in the siren cabs but the specs as stated are not what I would expect.
Conrad
|
|
|
|
Re: PA Horn Driver [message #7969 is a reply to message #7968] |
Thu, 04 January 2007 14:03 |
C4ster
Messages: 686 Registered: June 2001 Location: Mukwonago, WI (Milwaukee...
|
Senior Member |
|
|
I didn't think about that. But I suppose even driving the horn above 5K would still produce the highs but at a diminishing rate. I should still attempt to buy that one.
Conrad
|
|
|