Home » VintageKustom.com » Repairing Kustom Amps » 6 Pin Footswitch for Kustom k250-4 Wiring (6 Pin Footswitch for Kustom k250-4 Wiring)
icon5.gif  6 Pin Footswitch for Kustom k250-4 Wiring [message #11114] Tue, 02 June 2009 11:29 Go to next message
burnthogan is currently offline  burnthogan
Messages: 12
Registered: May 2009
Junior Member
I have a K250-4 & I am trying to get a footswitch working for it. does anyone have any schematics for builing the four button / six pin box or the Wah looking type boost pedal?

Has anyone built either of these? Can you point me in the right direction of some parts to do so.


Any info would be great. Please don't just respond with "check in previous posts" Been there.
Re: 6 Pin Footswitch for Kustom k250-4 Wiring [message #11115 is a reply to message #11114] Tue, 02 June 2009 12:08 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4728
Registered: June 2004
Location: NY
Senior Member
I can send you the schematic for the board to chassie interconnect harnesses which covers what you are asking about if you have a fax number or send me a self addressed stamped envelope.
Re: 6 Pin Footswitch for Kustom k250-4 Wiring [message #11116 is a reply to message #11115] Tue, 02 June 2009 13:43 Go to previous messageGo to next message
burnthogan is currently offline  burnthogan
Messages: 12
Registered: May 2009
Junior Member
That would be most helpful & much appreciated. you could fax it to my work at 610-734-2393. Thanks-Adam
Re: 6 Pin Footswitch for Kustom k250-4 Wiring [message #11123 is a reply to message #11114] Thu, 04 June 2009 05:59 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4728
Registered: June 2004
Location: NY
Senior Member
did you get the fax?
Re: 6 Pin Footswitch for Kustom k250-4 Wiring [message #11127 is a reply to message #11123] Thu, 04 June 2009 09:20 Go to previous message
burnthogan is currently offline  burnthogan
Messages: 12
Registered: May 2009
Junior Member
Yes I did. Thanks alot! I'll keep everyone updated when I get somewhere with this project. -Adam
Previous Topic: K200A-4 effects
Next Topic: Kustom PA50
Goto Forum:
  


Current Time: Thu Mar #d 14:37:44 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.