Home » VintageKustom.com » Replacement Part Suggestions » Kustom Studio 4-valve rebuild (looking for parts ideas)

Show: Today's Messages :: Show Polls :: Message Navigator

Kustom Studio 4-valve rebuild [message #12335] Tue, 10 November 2009 11:28   JBranch Messages: 9 Registered: November 2009 Location: Central GA Junior Member Hi all, I'm gathering info on materials to rebuild my Kustom Studio 4-valve cabinet. I have some duplicate threads around on this, but thanks to the help of lots of kind folks on the internet, I've gathered together some info on it. I have the power amp, the tubes, and the control section, so I'll be rebuilding the cabinet. I have the dimensions of the cabinet and know that it is oak. I have to replace the speakers, I have a picture showing them as Celestion G12-80s. The closest thing I can find now is the Celestion G-12 Classic Lead. I'm ASSUMING that this is the same speaker? Casters are no big deal. I've found a Fender handle that looks pretty close, but it has silver fasteners instead of gold. I also need some tweed material for the cover. The original was a rectangular tweed weave. And I need a speaker baffle. I've used the search function here, and was recommended to use fiberglass speaker enclosure from Radio Shack. I haven't checked on this yet. I have the original "K Studio 4-Valve" badge, but am missing the smaller "Celestion" badge. Amy I missing anything? Ideas for sources on the things I don't have? Note: I'm not trying to hoodwink anyone by rebuilding this and selling it as "vintage" I just want to build it back as close as possible to original condition. Thanks, John Report message to a moderator

Previous Topic:	Kustom K2504 Footswitch Needed
Next Topic:	need part

Goto Forum:

- VintageKustom.com  Comment Board  Replacement Part Suggestions  Repairing Kustom Amps- Classified Ads  For Sale  Wanted- FUDforum Questions & Problems  Questions & Problems about FUDforum