Home » VintageKustom.com » Comment Board » Just Got a Cascade, gold ports? (New amp and ports)
Just Got a Cascade, gold ports? [message #14261] Wed, 01 September 2010 14:19 Go to next message
ZiggyDude is currently offline  ZiggyDude
Messages: 24
Registered: May 2006
Location: Harrisburg PA
Junior Member
I wandered into a local store on Saturday and saw a Kustom bass amp. A 2x15 bass cab and 100 head in Cascade. Original handles, by Ross, wheels were perfect. The T&R was also really clean.

Though I have really been seeking out a blue 3x15 these years - I declared close enough and got it.

I noticed the ports have a bit of gold tint to them. Is that correct?

Best,

- Ziggy -
Re: Just Got a Cascade, gold ports? [message #14264 is a reply to message #14261] Wed, 01 September 2010 15:33 Go to previous messageGo to next message
braud357 is currently offline  braud357
Messages: 154
Registered: July 2010
Location: Louisiana
Senior Member
I have never seen any with gold tint - my guess is that it was gigged a lot - the gold could be nicotine stains. I bought an old Precision Bass that had this same problem. It was hell to get off, but was shiny chrome beneath !

[Updated on: Wed, 01 September 2010 15:34]

Report message to a moderator

Re: Just Got a Cascade, gold ports? [message #14265 is a reply to message #14264] Wed, 01 September 2010 16:03 Go to previous messageGo to next message
ZiggyDude is currently offline  ZiggyDude
Messages: 24
Registered: May 2006
Location: Harrisburg PA
Junior Member
I will try cleaning it and see. From the lack of damage I don't think it was gigged much but maybe the owner smoked.

What is a good cleaner?
Re: Just Got a Cascade, gold ports? [message #14268 is a reply to message #14261] Thu, 02 September 2010 09:48 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4728
Registered: June 2004
Location: NY
Senior Member
If the port is the plastic version,than just some dish washing soap on a warm damp sponge should do.
If the port is the pre plastic Aluminum item you should pick up some Mag wheel polish in the small tube form, or even some good old household Tarnex which you may already have.
Re: Just Got a Cascade, gold ports? [message #14292 is a reply to message #14261] Fri, 10 September 2010 09:59 Go to previous messageGo to next message
Bill
Messages: 64
Registered: March 2002
Location: Kansas
Member
Ziggy,
I never figured out whether it was smoke stain, or just that the clear coat had aged, but I used lacquer thinner to clean them back to the original color, and they have been fine.
Bill C
Re: Just Got a Cascade, gold ports? [message #14498 is a reply to message #14292] Mon, 04 October 2010 07:29 Go to previous message
Shaun_Musings is currently offline  Shaun_Musings
Messages: 323
Registered: April 2009
Location: Reading, MA
Senior Member

I had this problem. When I was finished cleaning them, there was still a ring of gold around the outer edge of the port, almost as if it was designated to be colored gold. I am still not sure why it was like this... It was a red cab...

SDC


Born on the Baaaaayou (Ok, in Massachusetts)
Previous Topic: Kustom Kombo Organ
Next Topic: Charger impedence??
Goto Forum:
  


Current Time: Thu Mar #d 18:31:00 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.