VintageKustom.com: Replacement Part Suggestions

Home » VintageKustom.com » Replacement Part Suggestions » Casters for KG412 cabinet (None shipped with unit)

Show: Today's Messages :: Show Polls :: Message Navigator

Casters for KG412 cabinet [message #15345]

Tue, 01 March 2011 20:59

ramrod250
Messages: 32
Registered: January 2011
Location: Germantown, Wisconsin

Member

I just took delivery on a KG412 cabinet, and was surprised that it didn't ship with casters (and apparently doesn't come with them). But the mounting blocks for casters are there and ready, and so I wondered if anyone has suggestions about proper "replacement" casters. Even the image on the box shows casters, but none were there.

Thanks for your help.

Jim Haught
Creedence + Kustom: a great combination.

Report message to a moderator

Re: Casters for KG412 cabinet [message #15365 is a reply to message #15345]

Sat, 05 March 2011 14:07

stevem
Messages: 4733
Registered: June 2004
Location: NY

Senior Member

Well if you are looking for the vintage Kustom type chrome roller casters, Peavey makes a real close copy and the only difference is a slightly smaller square mounting plate,my guess would also be that these are made in China so I would expext the chrome to not hold up anywhere as long as the orignals did!!

These can be had from antique electronics supply.
And in regards to mounting/placement, I think you have anwsered your own question, but basicly you want any caster to be as close to the cornors of the cab as possible.

[Updated on: Sat, 05 March 2011 14:11]

Report message to a moderator