Home » Classified Ads » Wanted » kustom k150-2 (transformer)
kustom k150-2 [message #17233] Mon, 25 June 2012 19:15 Go to next message
bertaire is currently offline  bertaire
Messages: 34
Registered: April 2012
Location: burbank california
Member
I need a power transformer for a k150-2. I have a transformer for a k100,will sell or trade, unless I can use it for the 150 . Dopes anyone know if that is possible ?
Re: kustom k150-2 [message #17234 is a reply to message #17233] Mon, 25 June 2012 20:41 Go to previous messageGo to next message
pleat is currently offline  pleat
Messages: 1452
Registered: June 2004
Location: Belding, Mi
Senior Member
The voltages for the K150-2 is 39.5 volts. The K100-1&2 voltages are 39.5 and the SC K100 are also 39.5 volts.
pleat
Re: kustom k150-2 [message #17236 is a reply to message #17233] Tue, 26 June 2012 11:14 Go to previous messageGo to next message
bertaire is currently offline  bertaire
Messages: 34
Registered: April 2012
Location: burbank california
Member
Thanks Pleat, If I understand you they are all 39.5 volts and should be interchangeable. The transformer I bought was said to come from a vintage 100 , I compared the two and the 150's magnet seems to be a little wider. Here are the numbers on the transformer I bought ...019-7002-01 and below it 1005824. I would like to put it in the completely dead 150 I just bought. Does it mean my 150 on the outside will now be a 100 on the inside assuming the transformer I bought is in fact a 100. Thank you in advance for your guidance.
Re: kustom k150-2 [message #17238 is a reply to message #17236] Tue, 26 June 2012 12:44 Go to previous messageGo to next message
Kustom_Bart is currently offline  Kustom_Bart
Messages: 601
Registered: October 2010
Location: Greenville, MichiGUN
Senior Member
It should still be a 150 because of the pre amp board and power section. As long as you are feeding it the proper voltage, it will be a 150.
Re: kustom k150-2 [message #17239 is a reply to message #17233] Tue, 26 June 2012 15:01 Go to previous message
bertaire is currently offline  bertaire
Messages: 34
Registered: April 2012
Location: burbank california
Member
Knowledge is power as they say but sharing that knowledge sets you apart. Thank you.
Previous Topic: Black 3-12 cab
Next Topic: Pickguard for K200A
Goto Forum:
  


Current Time: Thu Mar #d 10:00:52 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.