stroudsm Messages: 6 Registered: April 2013 Location: United States
Junior Member
I need a Reverb/Tremelo Preamp board (Think its PC303). It's the one with Rev/Trem and Preamp all on one board with jack for a foot switch. Contact me via email if you know where I can get a working one. scotty.stroud@gmail.com
Kustom_Bart Messages: 601 Registered: October 2010 Location: Greenville, MichiGUN
Senior Member
Take it to a tech and get it repaired. That is going to be easier than finding a board. The only way to find a board is buying a doaner amp and scavenging parts from it to make yours work. However for a little bit of money you could get both to work. They are pretty easy to repair.
stroudsm Messages: 6 Registered: April 2013 Location: United States
Junior Member
I was able to find the problem. In the past someone repaired the amp by replacing some transistors in the front end of the pre-amp. Instead of removing and replacing them they just cut the legs and soldered a new one on. One of the legs of Q302 had come unsoldered. Soldering it back fixed the problem Thanks for your advice and to Conductor Tom for encouraging me to troubleshoot it.
conductortom Messages: 96 Registered: July 2010 Location: Okla
Member
Glad it was an easy fix, Scotty. Keep in touch. Great group of folks here. Any questions you got someone here will more then likely will know the answer, or make up a good one! Welcome to our Kustom world!