Home » VintageKustom.com » Comment Board » Kustom Studio 2 Valve (Looking For Schematic)
Kustom Studio 2 Valve [message #19037] Mon, 05 August 2013 12:02 Go to next message
javelin is currently offline  javelin
Messages: 6
Registered: August 2013
Location: vancouver canada
Junior Member
Hi From Vancouver Canada

I am now to this forum and the proud new owner of a Kustom Studio 2 Valva Head... I am very excited to begin a restoration to bring this unique amplifier back to life.. Presently it works but has low volume and is somewhat distorted , the preamp works well when used as pre amp out into another power amp so I am assuming I will need to replace the caps and check the resistor values etc .... If any one can provide me with a schematic I would greatly appreciate the help..... Thanks Tim javelin53@gmail.com

Report message to a moderator

Re: Kustom Studio 2 Valve [message #19038 is a reply to message #19037] Mon, 05 August 2013 12:16 Go to previous messageGo to next message
Kustom_Bart is currently offline  Kustom_Bart
Messages: 601
Registered: October 2010
Location: Greenville, MichiGUN
Senior Member
Sent along with literature on them.

Report message to a moderator

Re: Kustom Studio 2 Valve [message #19039 is a reply to message #19037] Mon, 05 August 2013 12:30 Go to previous message
javelin is currently offline  javelin
Messages: 6
Registered: August 2013
Location: vancouver canada
Junior Member
Wow.... Thank you ever so much.... I have the day off and now I can start the investigation/restoration Thanks Again Tim

Report message to a moderator

Previous Topic: First post! Kasino PA cabs
Next Topic: Pics for the JBL D140F-6
Goto Forum:
  

[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Fri Apr #d 04:36:11 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.