VintageKustom.com: Comment Board » Need Dimensions of 4x12 PA colmuns and 200 Head

Home » VintageKustom.com » Comment Board » Need Dimensions of 4x12 PA colmuns and 200 Head (Just made a much desired acquisition - really could us help!)

Show: Today's Messages :: Show Polls :: Message Navigator

Need Dimensions of 4x12 PA colmuns and 200 Head [message #19592]

Tue, 29 October 2013 21:29

sskydiver1
Messages: 27
Registered: December 2008
Location: Texas

Junior Member

Hey Everyone -

My Man Cave is getting closer to Komplete - I just got the 4X12 PA Column system (CTS speakers with the alumnum dust caps) and need to get shipping quotes.

If anyone has a good guesstimate (or if they know it would be killer) what the dimensions and weight on these are each. The columns must be close to 60" tall I would imagine.

And the head is a standard 200

What is Killer is that it matches my 3X15 and 2X15 cabs - as well as pair of 1x12's I had made for myself in Tuck and Roll.

This is a Hail Mary - but really hoping for any thoughts!

THANKS SO MUCH!

- and for you EBay watchers - I snagged Skunk Baxter's Kombo II organ from Ebay very recently - but need to have it redone in Cascade. If anyone knows a Tuck and Roll upholster in Texas - PLEASE let me know. Again - Thanks

Report message to a moderator

Re: Need Dimensions of 4x12 PA colmuns and 200 Head [message #19593 is a reply to message #19592]

Tue, 29 October 2013 21:50

pleat
Messages: 1452
Registered: June 2004
Location: Belding, Mi

Senior Member

The Columns are 56"x16"x12" Weight I'm just guessing but I'd say 60 pounds each. The K200 Head is 24"x8"x12" and guess aroung 45 pounds.
The dimensions are from counting the number of T&R with each pleat being 2"

For recoving a cab, I don't know anyone who can do it exactly. The secret is the V cut foam Kustom used. Haven't found a supplier that has that type of foam.

pleat

Report message to a moderator

Re: Need Dimensions of 4x12 PA colmuns and 200 Head [message #19594 is a reply to message #19592]

Wed, 30 October 2013 07:52

carlc
Messages: 143
Registered: July 2006
Location: Summerville, SC

Senior Member

I weighed mine. The K200 PA head weighed 36 pounds and the 4x12" column weighed about 76 pounds.

Carl

[Updated on: Wed, 30 October 2013 07:53]

Report message to a moderator

Re: Need Dimensions of 4x12 PA colmuns and 200 Head [message #19595 is a reply to message #19593]

Wed, 30 October 2013 09:59

sskydiver1
Messages: 27
Registered: December 2008
Location: Texas

Junior Member

Thanks so much for the reply! I didn't know about the V-Cut foam - but I will tell you this - A guy named Dale Shuster who ised to work at Kustom did a couple of 1x12's for me - the naugahyde is still available. They look great! He just moved from Kansas to Georgia. I just had an email from him. He is a busy guy, but may be able to help anyone if they are willing to pay him fairly. Contact me if you need an email address for him.

THANKS!

Report message to a moderator