Home » VintageKustom.com » Comment Board » Microphone Impedance (K300 PA)
Microphone Impedance [message #20365] Sun, 23 March 2014 12:41 Go to next message
rehernden is currently offline  rehernden
Messages: 20
Registered: February 2014
Location: Blairsville, Ga
Junior Member
Does anyone know the recommended microphone impedance for k300 pa? I'm guessing it is high Z like most "older" pa's but can't find actual #'s.

Report message to a moderator

Re: Microphone Impedance [message #20367 is a reply to message #20365] Sun, 23 March 2014 13:03 Go to previous messageGo to next message
pleat is currently offline  pleat
Messages: 1452
Registered: June 2004
Location: Belding, Mi
Senior Member
The inputs are HiZ and it's a lot easier to use any new LoZ mic with a mic matching transformer to convert the mic for HiZ input of the kustom. I think most mics are considered HiZ with an impedence of 600 ohms or higher.
pleat

Report message to a moderator

Re: Microphone Impedance [message #20370 is a reply to message #20367] Sun, 23 March 2014 14:18 Go to previous messageGo to next message
rehernden is currently offline  rehernden
Messages: 20
Registered: February 2014
Location: Blairsville, Ga
Junior Member
Cool. I didn't know there were such things, not too expensive either. Learn something new almost every day. Thanks.

Report message to a moderator

Re: Microphone Impedance [message #20372 is a reply to message #20365] Mon, 24 March 2014 06:30 Go to previous message
stevem is currently offline  stevem
Messages: 4733
Registered: June 2004
Location: NY
Senior Member
You will also get alot less noise and interfearance by running balanced low Z and only converting it to Hi Z at the PA head with the transformer.

[Updated on: Mon, 24 March 2014 06:31]

Report message to a moderator

Previous Topic: K50-2
Next Topic: footswitch advice please
Goto Forum:
  

[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Fri Apr #d 08:13:21 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.