Home » VintageKustom.com » Comment Board » Cardboard Serial Number Plate (where does it go?)
Cardboard Serial Number Plate [message #23027] Tue, 02 June 2015 22:59 Go to next message
bluezebra is currently offline  bluezebra
Messages: 89
Registered: February 2014
Location: Lafayette, LA
Member
Just received a Red Model C795 Frankie head. This thing is pristine original but the cardboard Serial Number tag became unglued (go figure after all this time) and fell to the bottom of the head.
Where would the original location be so I can re-glue it in its proper location.

I also have a pristine Red Sparkle K100 head w cover I can sell if anyone out there happens to have a red bottom to go with it.

[Updated on: Tue, 02 June 2015 23:01]

Report message to a moderator

Re: Cardboard Serial Number Plate [message #23030 is a reply to message #23027] Wed, 03 June 2015 06:11 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4728
Registered: June 2004
Location: NY
Senior Member
I will have to look at mine and let you know.
The tag falling off or coming unglued thing happens all the time and Fenders and Marshall amps and use art store Matt medium to glue them back on with and I coat the face of them also to keep the lettering from smearing in the future.
Re: Cardboard Serial Number Plate [message #23032 is a reply to message #23027] Wed, 03 June 2015 11:45 Go to previous messageGo to next message
chicagobill
Messages: 2005
Registered: April 2003
Senior Member
It usually is mounted where the later metallic stickers were mounted. Under the perforated metal panel, on the aluminum back panel where the output transistors are mounted. It would be on the far right side as you look at the amp from the rear.

If you look closely, you might see traces of the original glue.
Re: Cardboard Serial Number Plate [message #23033 is a reply to message #23027] Wed, 03 June 2015 12:22 Go to previous message
bluezebra is currently offline  bluezebra
Messages: 89
Registered: February 2014
Location: Lafayette, LA
Member
OK, I see where the glue residue is now. It was laying on the left side
and I never looked right. Thanks C Bill!
Previous Topic: speaker protection
Next Topic: slanted 2-15's cabinet
Goto Forum:
  


Current Time: Thu Mar #d 22:11:41 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.