|
Re: Kustom II-Lead 1976 and Kustom 2 x 15" cabinet 1976 [message #24634 is a reply to message #24633] |
Mon, 15 February 2016 06:19 |
stevem
Messages: 4772 Registered: June 2004 Location: NY
|
Senior Member |
|
|
If the cabinet still still has its stock speakers it should be wired for a 4 ohm load ( two 8 ohm speakers wired in parallel ) which is also what the head is looking for to output its maximum wattage.
The amp should not be run on anything less than a 4 ohm load unless you play it at only low volumes, higher loads like 8 or 16 ohms are ok but then head will only output half its available clean wattage at 8 ohms and 1/4 that at 16 ohms.
[Updated on: Mon, 15 February 2016 06:21] Report message to a moderator
|
|
|
|
|
|
|