Home » VintageKustom.com » Replacement Part Suggestions » Speaker install - Kustom 3 tower
Speaker install - Kustom 3 tower [message #24647] Thu, 18 February 2016 11:18 Go to next message
jimbpilot is currently offline  jimbpilot
Messages: 9
Registered: January 2016
Location: Conroe, Texas 77303
Junior Member
Does anyone know what ohm load you end up with if you install 2 JBL D-140's rated at 16 0hm each with 1 JBL D-140 rated at 8 ohm if all wired in parallel ?? We are rejuvenating an old Kustom JBL three tower bass cabinet and K200 bass amp top.
JB


Jjim Buick
Re: Speaker install - Kustom 3 tower [message #24649 is a reply to message #24647] Thu, 18 February 2016 14:39 Go to previous message
chicagobill
Messages: 2005
Registered: April 2003
Senior Member
The impedance would be 4 ohms, but the power will not divide evenly between the three speakers. The 8 ohm would get 1/2 of the amps power and each 16 ohm would get 1/4.
Previous Topic: K250 1
Next Topic: Speaker replacement
Goto Forum:
  


Current Time: Thu Mar #d 21:29:18 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.