Home » VintageKustom.com » Comment Board » speaker identification please
speaker identification please [message #25989] Mon, 06 March 2017 13:36 Go to next message
vintagefan is currently offline  vintagefan
Messages: 166
Registered: March 2014
Location: Dallas
Senior Member
What brand speaker is this?

I bought a spare speaker for my 1969 K100C-8 amps....
It looks exactly like the original stock speakers in my K100C-8 amps.
But it does not have the same numbers/letters on the metal back frame that
my original speakers have.

The only markings are on the backside of the cone which says: LCC65
It measures 7.65 ohms. The seller said it came out of an early 70's Gibson amp.

What brand is it, and will it be ok as a replacement in my K100C-8 amps?

thanks...,
Re: speaker identification please [message #25990 is a reply to message #25989] Mon, 06 March 2017 13:43 Go to previous message
stevem is currently offline  stevem
Messages: 4728
Registered: June 2004
Location: NY
Senior Member
If it has the same Aluminum voice coil cover with the black center vent hole , the same number of ribs on the cone and if I recall right the original speakers have a seamed cone also , then yes it's the same and your golden!
Previous Topic: Cab speaker impedances
Next Topic: Kustom V1 RMS PA
Goto Forum:
  


Current Time: Thu Mar #d 14:18:06 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.