Home » VintageKustom.com » Comment Board » 12" CTS speaker?
12" CTS speaker? [message #26792] Fri, 13 July 2018 15:24 Go to next message
rodak
Messages: 511
Registered: October 2001
Location: Georgia
Senior Member
Does this speaker, from an Alamo amp, look comparable to the 12" CTS speakers that Kustom put into some of their amps? It has the same vented aluminum dome as the Jensen C12Ns in my 3x12 cabinet, wondering if it would make a suitable replacement for the one that's blown. (assuming the seller eventually comes off of his asking price a bit)

https://www.ebay.com/itm/192596687991?ul_noapp=true


www.combo-organ.com
Re: 12" CTS speaker? [message #26793 is a reply to message #26792] Sat, 14 July 2018 06:07 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4728
Registered: June 2004
Location: NY
Senior Member
If your looking to replace one of the speakers in the 3-12" cab it needs to be a 16 ohm one, not 8 ohm like the one on eBay your asking about which is a smaller magnet lesser wattage drive then what the C12N is.

There however is a 12" big magnet cts 16 ohm driver on eBay that says it's out of a Carvin amp ,and that would work!
Re: 12" CTS speaker? [message #26806 is a reply to message #26793] Wed, 18 July 2018 15:43 Go to previous messageGo to next message
rodak
Messages: 511
Registered: October 2001
Location: Georgia
Senior Member
Well, the one I found is 16 ohms (I knew that was a requirement), but I was concerned about the magnet size.

That Carvin does look good, though. Thanks!


www.combo-organ.com
Re: 12" CTS speaker? [message #26808 is a reply to message #26792] Thu, 19 July 2018 06:01 Go to previous message
stevem is currently offline  stevem
Messages: 4728
Registered: June 2004
Location: NY
Senior Member
Welcome!
Previous Topic: Kustom archeology
Next Topic: 300 PA System
Goto Forum:
  


Current Time: Thu Mar #d 18:41:39 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.