Home » VintageKustom.com » Replacement Part Suggestions » Switches that might rebuild bad rotary switches (Switches with correct type switch decks)
Switches that might rebuild bad rotary switches [message #26812] Fri, 20 July 2018 13:54
Saransk is currently offline  Saransk
Messages: 20
Registered: February 2017
Location: Northern Virginia
Junior Member
I found a company Electronic Surplus that carries a CTS SPDT rotary switch that looks like it's switch deck is the same as found on the "Bright" switches that many Kustom preamp boards use, especially the 100 & 200 "plexi" amps.

You'll have to do a little "surgery" to swap the decks, but it should work.

There's also an "unmarked" switch with same kind of switch deck that might work as well.

Michael
Previous Topic: help to identify proper 250v slow blow AC fuse for 72 coupe?
Next Topic: K100-2 3754 Bias Diode
Goto Forum:
  


Current Time: Thu Mar #d 10:13:37 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.