Home » VintageKustom.com » Repairing Kustom Amps » K300 help (K300-5 need help / pictures)
K300 help [message #27189] Sun, 03 February 2019 17:49 Go to next message
Ampfixer is currently offline  Ampfixer
Messages: 4
Registered: February 2019
Junior Member
Hi guys, I was recently gifted a K300-5 that a friend of mine was going to throw away. Seeing that as a sin, I rescued it, and set out to finding out what it needed to get back to running condition. I checked the DC output on the speaker jack, and it's about 70vdc.. definitely needed help. I took off the cover and saw the power board ( PC 5021 ) was pretty neat up and burned up some components. Would anyone out there have an up close pic of this board, so I can see what was what before the blow up. Just hoping bc it will make my life a lot easier. Thanks all. Bill
Re: K300 help [message #27191 is a reply to message #27189] Mon, 04 February 2019 07:17 Go to previous message
stevem is currently offline  stevem
Messages: 4728
Registered: June 2004
Location: NY
Senior Member
70 volts sounds strange since the output stage runs on a plus and minus 39 volts.
Pm me your email address and I can take some shots of my 300s guts and send them to you.

Whatever you do don't hook it up to a speaker unless you want to blow it!

[Updated on: Mon, 04 February 2019 07:18]

Report message to a moderator

Previous Topic: k200b-3 questions
Next Topic: Challenger Reverb Problem
Goto Forum:
  


Current Time: Tue Mar #d 04:54:25 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.