Home » Classified Ads » Wanted » K250-4 Reverb Tank Assembly w/ Shockmounts and Locking Mechanism (Why would someone remove and discard it like that?)
K250-4 Reverb Tank Assembly w/ Shockmounts and Locking Mechanism [message #27310] Mon, 13 May 2019 14:03 Go to next message
Joe Tritschler is currently offline  Joe Tritschler
Messages: 4
Registered: May 2019
Junior Member
The title and topic description say it all; I have a K250-4 that is a great amp except the entire reverb assembly is missing. I even swapped in another 150-ohm tank and verified that all the electronic circuitry is working fine; why on earth would you do that to an innocent amp? Help would be greatly appreciated. I'd also be interested in a four-button light-up footswitch and wah pedal for said amp...sadly also gone.
Re: K250-4 Reverb Tank Assembly w/ Shockmounts and Locking Mechanism [message #27311 is a reply to message #27310] Tue, 14 May 2019 07:36 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4728
Registered: June 2004
Location: NY
Senior Member
Unles you find a donor 150 ,250 or 300 pa head these shock mounts are very hard to come by !

What I have done is to get 8 short machine screws and nuts and them embedded the screw heads in clears silicone bath tube sealer.
This is a two step process.
First I place a 1/4" dab of sealer on the head of a screw and then push another screw agonist it so that there is still 1/8" between the head of each screw.
Do this on wax paper and let it set up overnight, the next day pack more sealer around the 2 screw combo to retain them to each other better.
When you do the final Assy of the pan back in the amp do not tighten up the nuts too much or you will spin out the screws, but this method does work!

[Updated on: Tue, 14 May 2019 07:37]

Report message to a moderator

Re: K250-4 Reverb Tank Assembly w/ Shockmounts and Locking Mechanism [message #27373 is a reply to message #27311] Fri, 07 June 2019 22:28 Go to previous messageGo to next message
Joe Tritschler is currently offline  Joe Tritschler
Messages: 4
Registered: May 2019
Junior Member
That is brilliant and thank you for sharing - I'm going to try it.
Re: K250-4 Reverb Tank Assembly w/ Shockmounts and Locking Mechanism [message #27498 is a reply to message #27310] Wed, 11 September 2019 11:45 Go to previous message
johnnysynth is currently offline  johnnysynth
Messages: 45
Registered: June 2018
Member
Hi: There's a guy who did a complete restoration on a K-250-4 including the power switches and the four position pedal & wah pedal. It's Vandenburg Restoration. Looks to me like he did a bang up job on that one and then sold it to somebody. It's vaquely possible that's the one you wound up with yeah? You could contact
him for clues. I've been looking here on this site for that exact model for months with no avail so I'd keep it if I were you. . .those babies are pretty hard to come by. They're definetly 'out there' as in not 'extinct' but pretty rare. I want to run my Wurli thru one of those cuz my freind said they're great for that
especially the tone booster mid-range thingy. . .not to mention speed controlled vibrato and tremolo. . .WOW!
Jake
Previous Topic: white guitar
Next Topic: Looking for 1 power cord wrap post for K200 B1
Goto Forum:
  


Current Time: Thu Mar #d 11:41:11 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.