Home » VintageKustom.com » Repairing Kustom Amps » Fixing Up a K200-B1
Fixing Up a K200-B1 [message #27593] Sun, 17 November 2019 19:13 Go to next message
DeadKoby is currently offline  DeadKoby
Messages: 35
Registered: August 2017
Location: Cleveland, OH
Member
Hi guys, fortunately, I know what I'm doing, so I won't be begging for silly stuff. One of the 3 15" CTS (bass) drivers is AWOL, and I figured someone either would want to sell me one, or had a recommendation for an aftermarket replacement driver.

All your electrons are belong to us.
Re: Fixing Up a K200-B1 [message #27594 is a reply to message #27593] Mon, 18 November 2019 05:56 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4728
Registered: June 2004
Location: NY
Senior Member
You need to turn up a good used one or get that reconed because no one makes a off the shelf 16 ohm bass driver which is what those are.
Re: Fixing Up a K200-B1 [message #27595 is a reply to message #27593] Mon, 18 November 2019 12:03 Go to previous messageGo to next message
DeadKoby is currently offline  DeadKoby
Messages: 35
Registered: August 2017
Location: Cleveland, OH
Member
I've located a good used one. I can't re-cone one that isn't there at all. Someone removed it from the cabinet years ago.

Weber DOES make a 16ohm 15" bass driver BTW. As an amp tech/dealer, I'm always looking to preserve originality and repair things on a budget.

If you ever need a "weird" guitar/bass speaker, http://tedweber.com is the place to go. I kept digging in hopes of an original type.


All your electrons are belong to us.
Re: Fixing Up a K200-B1 [message #27596 is a reply to message #27595] Tue, 19 November 2019 05:59 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4728
Registered: June 2004
Location: NY
Senior Member
I need to look for you as I may still have a good CTS bass driver or two when I swapped in EVMs in one of may cabinets.
Re: Fixing Up a K200-B1 [message #27598 is a reply to message #27593] Thu, 21 November 2019 16:45 Go to previous message
DeadKoby is currently offline  DeadKoby
Messages: 35
Registered: August 2017
Location: Cleveland, OH
Member
Thanks, but the Job is done! I found a gent in Kansas that had one, and it's arrived here, been installed, and ready to rock.

If you wish to follow the Saga, you can find it on my YouTube Channel DeadKoby


All your electrons are belong to us.
Previous Topic: Adding A Spring Reverb Tank To A K100-1 50 Watt
Next Topic: proud new owner of a Kustom Kombo organ needs a little help
Goto Forum:
  


Current Time: Thu Mar #d 17:58:41 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.