Home » VintageKustom.com » Replacement Part Suggestions » Kustom 150 Reverb Tank Needed (Bought a plastic faced 150 amp and it is missing the reverb tank. Need help sourcing one. )
Kustom 150 Reverb Tank Needed [message #27942] Sat, 26 December 2020 16:35 Go to next message
Bribot84 is currently offline  Bribot84
Messages: 2
Registered: December 2020
Junior Member
Hey all,
Looking forward a reverb tank for the 150. I also need two mounting bars so I can install it properly. Hoping everything works when plugged back in but have a feeling it's been removed for a reason and might need further work. S anyone know where to find an original tank or what a suitable replacement would be?
Re: Kustom 150 Reverb Tank Needed [message #27947 is a reply to message #27942] Mon, 28 December 2020 07:11 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4728
Registered: June 2004
Location: NY
Senior Member
Hi!
It's very rare that the reverb circuits themselves in the plexiglass face amps have problems, so a new tank should get you back in action.
That tank you need can be had from tubes & more, and is part number P-RMOD-4FB3A1A.

The mounting tubes that where used can be made from 3/8" aluminum or brass tuning, that you flatten the ends out on, but flat Aluminum stock will be easier.

The screws that hold the mounting system to the amp chassis where 6/32.

Note that it's very important to mount the pan in the amp so that the output side of the pan is opposite the amps power transformer.

The quality of the shielding of the cables used makes a difference in the noise level also!

[Updated on: Mon, 28 December 2020 07:14]

Report message to a moderator

Re: Kustom 150 Reverb Tank Needed [message #27948 is a reply to message #27947] Mon, 28 December 2020 07:17 Go to previous messageGo to next message
Bribot84 is currently offline  Bribot84
Messages: 2
Registered: December 2020
Junior Member
You're amazing thanks you.
Re: Kustom 150 Reverb Tank Needed [message #27949 is a reply to message #27942] Mon, 28 December 2020 09:17 Go to previous message
stevem is currently offline  stevem
Messages: 4728
Registered: June 2004
Location: NY
Senior Member
I am assuming you have a plexiglass face amp, beause the tanks for the later metal face 150 amps are different.
Previous Topic: cheap casters
Next Topic: CTS Bass Speaker Specs
Goto Forum:
  


Current Time: Thu Mar #d 12:43:11 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.