Home » VintageKustom.com » Repairing Kustom Amps » Woodson 150-2 (Bulb)
Woodson 150-2 [message #28034] Wed, 17 February 2021 07:39 Go to next message
jammy5152 is currently offline  jammy5152
Messages: 61
Registered: May 2018
Location: Georgia
Member

Someone who is good at Math and figuring out Ohm's Law, I need to know the voltage of the Power Indictator Bulb if it is fed by a 2.2K Resistor as a fuse.
I also have a mixing board that is also fed by a resistor which I'm working on later...
This bulb is grounded one leg and then the other leg is fed into the board right by this 2.2K Resistor..
Any info. ?
Re: Woodson 150-2 [message #28035 is a reply to message #28034] Wed, 17 February 2021 11:43 Go to previous message
stevem is currently offline  stevem
Messages: 4738
Registered: June 2004
Location: NY
Senior Member
Ohms law can figure out any one of 4 things , voltage , current, wattage or resistanc / ohms.

To due such you must have any 2 of the above 4 things, but you have only provided us with 1, namely resistance!

To calculate voltage we still need a number for either current, or wattage.

[Updated on: Wed, 17 February 2021 11:55]

Report message to a moderator

Previous Topic: Repairing A Kustom 100 4 CH PA head
Next Topic: Repairing Kustom 200 4 CH PA head
Goto Forum:
  


Current Time: Thu May 23 06:29:13 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.