jammy5152 Messages: 61 Registered: May 2018 Location: Georgia
Member
I have looked on this site for the Kasino Concert 120 Watt Head and I'm trying to figure out the Bulb that goes into the
Illumination Socket.......I have repaired this amp but the # 47 Bayonet bulb that was in it ( I don't believe it's the right one ) keeps blowing out after a short while...Amp stays on though....In the Kustom 200 , I see that it uses a 1302 bulb???
Could this be the same one in the Kasino Concert??
Does anyone have the information on the correct voltage and size of this bulb for the Kasino Concert??
On most schematics I can see the layout of the bulb path but it does not list the bulb # or voltage....
I'm guessing maybe 6.5.??
Thanks
jammy5152 Messages: 61 Registered: May 2018 Location: Georgia
Member
Thanks for the info...Works great now....Still trying to figure out 2.2k resistor that feeds small bulb on another amp....
Bulb is out on a 150 watt amp / board number 5116....Might take a chance and feed 120 volt bulb to switch to turn on when activated..
What's the best way to figure this out before I do this alternative hook-up.????
stevem Messages: 4733 Registered: June 2004 Location: NY
Senior Member
I and no one else without a schematic of this amp can easily help you out with this bulb question you have , just passing along the info of the resistor that feeds it does not help one little bit!
If you tell us how much voltage is coming into this resistor and if it's a ac or D.C. Voltage ( I will for now assume it's D.C.) then we may have a shot at helping you, other wise we need crystal ball !