Home » VintageKustom.com » Repairing Kustom Amps » Please help me identify all capacitors on pc 5131 revo (Identify capacitors on pc 3151 revo)
Please help me identify all capacitors on pc 5131 revo [message #28249] Mon, 21 June 2021 01:59 Go to next message
Lilhunter1982@aol.com is currently offline  Lilhunter1982@aol.com
Messages: 4
Registered: June 2021
Junior Member
I have a kasino lounge. I need help identifying all the capacitors on the pc3151 revo board. I've replaced the 209v zener diodes and the transistors already. Please help me
Re: Please help me identify all capacitors on pc 5131 revo [message #28250 is a reply to message #28249] Mon, 21 June 2021 05:37 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4728
Registered: June 2004
Location: NY
Senior Member
Hello and welcome!

First off what is the issue your having with that item of gear?

Is this a mixer?

[Updated on: Mon, 21 June 2021 05:39]

Report message to a moderator

Re: Please help me identify all capacitors on pc 5131 revo [message #28251 is a reply to message #28250] Mon, 21 June 2021 11:44 Go to previous messageGo to next message
Lilhunter1982@aol.com is currently offline  Lilhunter1982@aol.com
Messages: 4
Registered: June 2021
Junior Member
It's a kasino lounge guitar amp. It's the pc5131rev-o board. It's fried. I replaced the 1n2069 200 v zener diodes already, replaces the two transistors, and I've replaced the 5349 diodes too. But now it's humming really loudly for a few seconds, then blows the fuse. When I first got it you could see where them white zener diodes had got super hot but it worked for a short time. Now after replacing all That. It hums really loud like I said before and then it blows the fuse. I think the pc5131rev-O is the power board for the entire amp. None of the effects work either. I have no idea how to post a picture on here of it or I would do so. PleAse help
Re: Please help me identify all capacitors on pc 5131 revo [message #28253 is a reply to message #28250] Mon, 21 June 2021 13:25 Go to previous messageGo to next message
Lilhunter1982@aol.com is currently offline  Lilhunter1982@aol.com
Messages: 4
Registered: June 2021
Junior Member
I've replaced both transistors, the two 5349 diodes and the four 1n2069 diodes. Now when I turn it on it hums really loudly and blows the fuse. Making me think that it's the poly and ceramic capacitors. But it doesn't list what they are on the schematic and I have no way of testing them so I was just going to order new ones.
Re: Please help me identify all capacitors on pc 5131 revo [message #28254 is a reply to message #28249] Mon, 21 June 2021 16:01 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4728
Registered: June 2004
Location: NY
Senior Member
We can not post pictures here.

None of the capacitors that you are asking about would make for your blowing fuse issue.

Please send me a photo of your schematic and take it in two sections, also send me some good shots of the whole inside of the amp and the board your working on.

smag25ra5@yahoo.com.
Re: Please help me identify all capacitors on pc 5131 revo [message #28255 is a reply to message #28254] Tue, 22 June 2021 01:47 Go to previous messageGo to next message
Lilhunter1982@aol.com is currently offline  Lilhunter1982@aol.com
Messages: 4
Registered: June 2021
Junior Member
Ok I will do that first thing in the morning, I'll get then to you. Thank you do much. I
Re: Please help me identify all capacitors on pc 5131 revo [message #28590 is a reply to message #28255] Fri, 13 May 2022 23:14 Go to previous messageGo to next message
James Myrick is currently offline  James Myrick
Messages: 3
Registered: June 2021
Junior Member
I have schematics for this board and would love to be cc on emails if possible. I'm having similar issues with the same power amplifier board. myrickjames.2014@gmail.com
Re: Please help me identify all capacitors on pc 5131 revo [message #28601 is a reply to message #28590] Wed, 18 May 2022 07:40 Go to previous message
jammy5152 is currently offline  jammy5152
Messages: 61
Registered: May 2018
Location: Georgia
Member

If I could , I would like also to be included on this post to receive the schematics also😬😬😬
jtweedell@att.net
Previous Topic: Kustom 1-B Combo 1974
Next Topic: Strange PC102 Board
Goto Forum:
  


Current Time: Thu Mar #d 19:58:06 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.