Home » VintageKustom.com » Replacement Part Suggestions » Looking for help with a 150 4x10 with Trem-Vibe (Power transformer…?)
Looking for help with a 150 4x10 with Trem-Vibe [message #28441] Wed, 09 February 2022 09:45 Go to next message
C-Ouzts is currently offline  C-Ouzts
Messages: 2
Registered: February 2022
Junior Member
Hello! So I bought a very dirty 150 with trem/vibe and have replaced a few things in it but it's still not coming back to life.
I was wondering if anyone knew what kinds of power transformer these amp use I think that will be my next part to replace.
If anyone has any info they can give on these great SS amps that would be much appreciated!
Thanks, Clint
Re: Looking for help with a 150 4x10 with Trem-Vibe [message #28442 is a reply to message #28441] Wed, 09 February 2022 11:57 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4728
Registered: June 2004
Location: NY
Senior Member
What leads you to think that it needs a power transformer, does either the primary or secondary side resistance check open?

What parts have you replaced already ?
Re: Looking for help with a 150 4x10 with Trem-Vibe [message #28443 is a reply to message #28441] Wed, 09 February 2022 12:03 Go to previous messageGo to next message
JDinPA17603 is currently offline  JDinPA17603
Messages: 69
Registered: May 2018
Location: Lancaster, PA
Member
Welcome to the group. Couple of questions for you.
First, do you have any test equipment or tools such as multimeter, oscilloscope, soldering iron?
Second, what is the major problem with the amp ...
Blows fuses, no sound, distorted sound?
Third what have you replaced so far?
We look forward to helping you get your amp up and running.
There are several members on here with extensive experience working on these amps.
John


Old Us Navy Vietnam Vet
Playing for my own enjoyment and irritation of the neighbors.
Re: Looking for help with a 150 4x10 with Trem-Vibe [message #28444 is a reply to message #28443] Wed, 09 February 2022 18:45 Go to previous messageGo to next message
C-Ouzts is currently offline  C-Ouzts
Messages: 2
Registered: February 2022
Junior Member
Thanks for the responses and I'm my friend is working on it who is a professional just needed help reaching out, so the caps and fuse that was blown was replaced and that's it so this was somewhat of a next step in replacing parts.
Re: Looking for help with a 150 4x10 with Trem-Vibe [message #28445 is a reply to message #28441] Wed, 09 February 2022 19:41 Go to previous message
stevem is currently offline  stevem
Messages: 4728
Registered: June 2004
Location: NY
Senior Member
Which cap was blown, the .022 uf on the primary side of the power transformer, or one of the two big main filter cans mounted on the floor of the chassis?

If it was the .022 cap then the amp may have taken lightening hit and then there could be a ton more wrong with the amp!

Also note that this cap really needs to be a 400 volt cap ( currently a 150 volt as built! ) to handle the peak AC voltage off of the wall outlet!

Also note that these amps have a big choke transformer after the power transformer that could be bad also.
The choke is getting fed DC voltage after the rectifier diode bridge.

There are two Toroidal type power transformers that can be used in these amps, one is made by Hammond and is part number 182N18.

The other is made by Avel Linberg and is part number Y236654.

Both of these are a up grade and will mount with a one bolt on the rear wall of the amp.
Previous Topic: handles
Next Topic: Kustom 50-2 Amplifer
Goto Forum:
  


Current Time: Thu Mar #d 06:00:06 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.