Home » VintageKustom.com » Repairing Kustom Amps » Kustom 50-2 Amp Ground Cord (Grounding Power Cord)
Kustom 50-2 Amp Ground Cord [message #28540] Mon, 18 April 2022 21:49 Go to next message
jammy5152 is currently offline  jammy5152
Messages: 61
Registered: May 2018
Location: Georgia
Member


Hey
I have replace the 2 prong power cord with a 3 prong power cord and noticed a cap that reads 0.22 uF/ 150 VAC
which is soldered to the middle leg of the switch with 1 lead and the other lead is grounded to a screw post on the back of the amp....
I'm using that ground post for my green wire now was wondering is that the " Death Cap" and should it be cut
out of the switch area...??
I have not turned it on yet while waiting for another part ...
This is a Kustom 50-2 amplifier...
Thanks

[Updated on: Mon, 18 April 2022 22:01]

Report message to a moderator

Re: Kustom 50-2 Amp Ground Cord [message #28541 is a reply to message #28540] Tue, 19 April 2022 06:10 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4728
Registered: June 2004
Location: NY
Senior Member
Just cut it out completely.

Is this the amp you need the volume intensity pot for?

[Updated on: Tue, 19 April 2022 06:10]

Report message to a moderator

Re: Kustom 50-2 Amp Ground Cord [message #28542 is a reply to message #28541] Tue, 19 April 2022 07:22 Go to previous messageGo to next message
jammy5152 is currently offline  jammy5152
Messages: 61
Registered: May 2018
Location: Georgia
Member

Yes it is ... It's for the Vib/ Tremelo though...I have a pot coming in which I might be able to remove the shaft to replace in mine...

[Updated on: Tue, 19 April 2022 07:24]

Report message to a moderator

Re: Kustom 50-2 Amp Ground Cord [message #28546 is a reply to message #28540] Tue, 19 April 2022 10:16 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4728
Registered: June 2004
Location: NY
Senior Member
What is bad with your original pot/ swt?
Re: Kustom 50-2 Amp Ground Cord [message #28551 is a reply to message #28546] Tue, 19 April 2022 20:46 Go to previous message
jammy5152 is currently offline  jammy5152
Messages: 61
Registered: May 2018
Location: Georgia
Member

stevem
The shaft is broken on the pot...I took it apart and the shaft is missing completely and the rear of the pot is in broken plastic pieces ...This must have fallen over sometime ago ( I got it from someone) I'm waiting on a pot that looks just like it and will replace the front of the pot with the shaft
Thanks

[Updated on: Wed, 27 April 2022 19:35]

Report message to a moderator

Previous Topic: K50
Next Topic: Kustom 50-2 Reverb
Goto Forum:
  


Current Time: Thu Mar #d 13:21:49 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.