Home » VintageKustom.com » Repairing Kustom Amps » Kustom 50-2 Reverb (Potentiometer Repair)
Kustom 50-2 Reverb [message #28557] Tue, 26 April 2022 06:56
jammy5152 is currently offline  jammy5152
Messages: 61
Registered: May 2018
Location: Georgia
Member

I bought a push/pull potentiometer off EBay and disassembled my broken Vib / Tremelo pot from my 50-2 amp and installed the parts from the new pot into the old pot body ( the 3 solder terminals on the new one did not line up with the board holes ) and re-soldered it back to the board...cleaned all pots and installed 3 prong cord...cut shaft of new pot ( to long) ...installed temporary knob with screw until I find one that looks like Kustom knob(screw clamp knob) ....Works great...
Reverb seems to be not deep enough though... Any thoughts....Cleaned RCA JACKS....REVERB echos when amp is moved a little...

[Updated on: Tue, 26 April 2022 13:42]

Report message to a moderator

Previous Topic: Kustom 50-2 Amp Ground Cord
Next Topic: Reverb K50-2 Reverb Repair
Goto Forum:
  


Current Time: Thu Mar #d 15:49:39 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.