Home » VintageKustom.com » Comment Board » Speakers (Cabinet impedance )
Speakers [message #28617] Mon, 13 June 2022 16:59
stevem is currently offline  stevem
Messages: 4728
Registered: June 2004
Location: NY
Senior Member
Hi all!

I stumbled on info about Kustom cabinets on the EL34 world site that has some wrong info in it.

Under the schematic listing they have there for Kustom amps they have a number 13 listing call Speaker configuration.

In that listing is stated that the 3 driver type cabinets are 2.7 ohms, which would call for 8 ohm drivers which is not correct.
All the 3 driver cabinets had 16 ohm drivers which made for a 5.3 ohm load.

[Updated on: Mon, 13 June 2022 17:00]

Report message to a moderator

Previous Topic: Round 2-button foot switch
Next Topic: 150 PA column
Goto Forum:
  


Current Time: Fri Mar #d 06:34:56 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.