is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » » Comment Board » Ohms of cabinet 2x12
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
Ohms of cabinet 2x12 [message #28882] Tue, 27 December 2022 13:11 Go to next message
Burty is currently offline  Burty
Messages: 1
Registered: December 2022
Junior Member
Hi, I have a 2x12 teal cascade cabinet. Jensen speakers. What is the ohms for the cab. I. was told 8 but want to be sure that I have the correct setting on my amp. Thanks for any help.
Re: Ohms of cabinet 2x12 [message #28883 is a reply to message #28882] Wed, 28 December 2022 06:26 Go to previous message
stevem is currently offline  stevem
Messages: 4745
Registered: June 2004
Location: NY
Senior Member
If it's a Vintage cab that has its original speakers then it will be 8 ohms.

As in two 16 speakers wired in parallel.

If care to test with a ohm meter at the speaker jack you will get a resistance reading of 9 ohms to 6 ohms.

[Updated on: Wed, 28 December 2022 06:28]

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: Screws for back of Kustom Cabs
Next Topic: Difference between Kustom guitar and bass cabinets
Goto Forum:

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Thu Jun 13 21:48:31 EDT 2024