Home » VintageKustom.com » Replacement Part Suggestions » K100-1 power indicator light bulb and assembly (Replacing power indicator lamp)
K100-1 power indicator light bulb and assembly [message #29038] Tue, 27 June 2023 14:34 Go to next message
OldGoat is currently offline  OldGoat
Messages: 2
Registered: June 2023
Junior Member
I recently purchased a K100-1 amp and it needs the power indicator light bulb assembly. I'd appreciate any assistance.
Re: K100-1 power indicator light bulb and assembly [message #29040 is a reply to message #29038] Tue, 27 June 2023 18:59 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4738
Registered: June 2004
Location: NY
Senior Member
Hi.
The bulb you need is a GE 1829.

If you need the bulb holder and jewel they are both available from antique electronics.

The jewel is part number P-L121.

The bulb holder is P-L124.

Be careful when you get the amp working because that 5 watt box type resistor gets really hot fast!
Re: K100-1 power indicator light bulb and assembly [message #29041 is a reply to message #29040] Wed, 28 June 2023 13:50 Go to previous message
OldGoat is currently offline  OldGoat
Messages: 2
Registered: June 2023
Junior Member
Thank you! I have the jewel, I just need the lamp and lamp assembly. I appreciate your help.
Previous Topic: where can i find a whatchamahoozit for a k150-2?
Next Topic: Replcement Ball Casters
Goto Forum:
  


Current Time: Thu May 23 05:10:45 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.