Home » VintageKustom.com » Repairing Kustom Amps » Information on Voicing Control (Looking for wiring details for voicing control)
Information on Voicing Control [message #29228] Mon, 01 April 2024 21:39 Go to next message
KustomIILead is currently offline  KustomIILead
Messages: 1
Registered: March 2024
Junior Member
I am looking to find out exactly how the voicing control potentiometer is wired and what value potentiometer is used on amps such as the Kustom Lead III and similar. I have a wiring diagram for the board itself and a photo of one that shows a red, grey, and white wire terminating on the board, but I have no idea where the wires go when they leave the board.

The reason I ask is that I have a Lead II which has the voicing board inside it but it's not wired to a potentiometer on this amp (it's the exact same board though, the holes and traces exist to wire it in). I'd like to wire it up and see what it sounds like.

Thanks!
Re: Information on Voicing Control [message #29229 is a reply to message #29228] Tue, 02 April 2024 06:54 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4739
Registered: June 2004
Location: NY
Senior Member
I can't say, but later I will look and see if my lead 4 is the same.
Meanwhile if you go to musicparts.com you can purchase the schematic on line and they will email it to you for 20 bucks.
Re: Information on Voicing Control [message #29230 is a reply to message #29228] Tue, 02 April 2024 17:19 Go to previous message
stevem is currently offline  stevem
Messages: 4739
Registered: June 2004
Location: NY
Senior Member
I can't you because my Lead IV does not have that control.
Previous Topic: '69-'70 Kustom 100 2 power cord upgrade
Next Topic: K250-1 bulbs in switches
Goto Forum:
  


Current Time: Wed May 29 02:27:13 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.