Today's Messages (on)  | Unanswered Messages (off)

Forum: Comment Board
 Topic: Amp ID
Re: Amp ID [message #27644 is a reply to message #27637] Sun, 19 January 2020 06:20
stevem is currently offline  stevem
Messages: 4241
Registered: June 2004
Location: NY
Senior Member
On those two model combo amps most everything is on the board .
This means they bring onto the amp board A/C voltage to the 4 rectifier diodes and the pilot lamp.

The fix is to remove the diodes from the board and mount a new type full case rectifier bridge diode set up to the chassis.

The fix for the pilot lamp is to cut the circuit traces off at the lamp and then run a tightly twisted pair of wires back to the part of the board that feeds the lamp so as to no use that circuit trace.

If I recall right the lamp mod will remove the most idle hum from the amp.
Forum: For Sale
 Topic: Kustom Collection
Re: Kustom Collection [message #27645 is a reply to message #27643] Sun, 19 January 2020 06:30
johnnysynth is currently offline  johnnysynth
Messages: 37
Registered: June 2018
Member
Any speakers the go with the 25-4?



Current Time: Sun Jan #d 17:04:26 EST 2020
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.