VintageKustom.com: Repairing Kustom Amps

Home » VintageKustom.com » Repairing Kustom Amps » K200A-4 effects

Show: Today's Messages :: Polls :: Message Navigator

K200A-4 effects [message #10510]

Sun, 22 February 2009 01:56

BC
Messages: 583
Registered: March 2000
Location: Kentucky

Senior Member

I was followed home yesterday by a K200A-4 with a 3x15 Altec cabinet. I bought the amp in "dead" condition as I took the owner at his word. When I got home I plugged it up and found it really does work but the pilot light was burned out. The amp sat dormant for a few years and popped and cracked for a few minutes then sounded better as it was played a bit. However, none of the effects are working which seemed a little odd. Does this point to any particular problem or are they separate problems? I know on this model all effects are available on one channel so I thought that might be a clue. Thanks! BC Cool

Report message to a moderator

[Message index]

		K200A-4 effects By: BC on Sun, 22 February 2009 01:56
		Re: K200A-4 effects By: BC on Sun, 22 February 2009 02:22
		Re: K200A-4 effects By: BC on Sun, 22 February 2009 17:18
		Re: K200A-4 effects By: chicagobill on Mon, 23 February 2009 11:07
		Re: K200A-4 effects By: BC on Mon, 23 February 2009 13:24
		Re: K200A-4 effects By: chicagobill on Mon, 23 February 2009 15:38
		Re: K200A-4 effects By: burnthogan on Tue, 02 June 2009 10:48

Previous Topic:	Charger Trouble
Next Topic:	6 Pin Footswitch for Kustom k250-4 Wiring

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Fri Sep 20 19:11:57 EDT 2024