Home » VintageKustom.com » Replacement Part Suggestions » 250-4 original 4-switch footswitch markings?
Re: 250-4 original 4-switch footswitch markings? [message #11335 is a reply to message #6067] Sun, 05 July 2009 14:10 Go to previous message
pleat is currently offline  pleat
Messages: 1413
Registered: June 2004
Location: Belding, Mi
Senior Member
Peter, kustom offered a round footswitch with 4 switches that had a 4 pin XLR plug for the K200A series. I think that one would be labeled on a disc in the center of the switches.
The K250-4 footswitch had 4 pedals and a 5 pin XLR plug. To figure out which one is which, since you can't read the labels.
My schematic shows from left to right Trem/Vib, reverb, boost, and fuzz. These pedals used small light bulbs to illuminate the label, so maybe the bulbs are burned out or the pedal is not getting the voltage to run the lights. If you remove the back of the pedal the color coding would be, red + voltage, white wire is trem/vib, green is reverb, blue is boost, and orange is fuzz.
I can send you the schematic, shoot me an email at djt@chartermi.net
Don
 
Read Message icon5.gif
Read Message
Read Message
Previous Topic: 2x15 speakers 16 ohms
Next Topic: Thermal Sensor K-150-6
Goto Forum:
  


Current Time: Wed Nov #d 14:07:56 EST 2020
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.