Home » VintageKustom.com » Comment Board » K150 and BC PA Qs
Re: K150 and BC PA Qs [message #8347 is a reply to message #8346] Fri, 02 March 2007 13:45 Go to previous message
Bikerboy is currently offline  Bikerboy
Messages: 7
Registered: December 2006
Location: South Coast, England
Junior Member
Yes, Steve, you are right as usual. XLR = 3 pins on the front but mine has four solder lugs on the back, number 4 presumably ground as you say. With 3 of the four connected as one I guess I answered my own question as there would need to be at least 3 separate connections to supply phantom power. Effectively I only have two connections same as jack input, the only difference is that XLR goes to a different part of the preamp board. So I'll just have to use condensers with their own internal battery. And you are also right about a separate switch but I just thought maybe they were continually powered....ho hum.....

Bikerboy

Half Man, Half Vegetable, Half Wit

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: What's it worth?
Next Topic: Kasino Guitar Question
Goto Forum:
  

[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Sat Apr #d 13:49:54 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.