VintageKustom.com: Comment Board » What to connect Kustom K250-4

Home » VintageKustom.com » Comment Board » What to connect Kustom K250-4

Show: Today's Messages :: Show Polls :: Message Navigator

Return to the default flat view

Create a new topic

Submit Reply

Re: What to connect Kustom K250-4 [message #9231 is a reply to message #9230]

Thu, 14 February 2008 12:33

stevem is currently offline

stevem
Messages: 4733
Registered: June 2004
Location: NY

Senior Member

Hi, That jack is to feed the line output of your 250s power output stage to another power output stage in another kustom speaker cabinet.
These rigs where called a model 500,in fact you buy any number of additional powered cabinets if you cared to, and if you look in the literature section on this site you can read and view them.
You could also power any other power amp with this output.
The k250-4 model outputs about 108 watts RMS into a 4 ohm load, with 169 peak watts.
Into a 8 ohm load it will output 85 watts RMS.

Report message to a moderator

Send a private message to this user

[Message index]

		What to connect Kustom K250-4 By: frans on Thu, 14 February 2008 11:11
		Re: What to connect Kustom K250-4 By: stevem on Thu, 14 February 2008 12:33
		Re: What to connect Kustom K250-4 By: frans on Fri, 15 February 2008 10:35
		Re: What to connect Kustom K250-4 By: chicagobill on Fri, 15 February 2008 10:47
		Re: What to connect Kustom K250-4 By: frans on Fri, 15 February 2008 15:59
		Re: What to connect Kustom K250-4 By: chicagobill on Fri, 15 February 2008 18:08
		Re: What to connect Kustom K250-4 By: johnnysynth on Tue, 06 August 2019 07:30
		Re: What to connect Kustom K250-4 By: stevem on Mon, 18 February 2008 06:28

Previous Topic:	Kustom Column info
Next Topic:	Impedence of JBL D140F

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

PDF

]

Current Time: Sat Apr #d 19:26:33 EDT 2024

.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.