Home » VintageKustom.com » Repairing Kustom Amps » K200A-4 effects
K200A-4 effects [message #10510] Sun, 22 February 2009 01:56 Go to previous message
BC
Messages: 583
Registered: March 2000
Location: Kentucky
Senior Member
I was followed home yesterday by a K200A-4 with a 3x15 Altec cabinet. I bought the amp in "dead" condition as I took the owner at his word. When I got home I plugged it up and found it really does work but the pilot light was burned out. The amp sat dormant for a few years and popped and cracked for a few minutes then sounded better as it was played a bit. However, none of the effects are working which seemed a little odd. Does this point to any particular problem or are they separate problems? I know on this model all effects are available on one channel so I thought that might be a clue. Thanks! BC Cool
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Charger Trouble
Next Topic: 6 Pin Footswitch for Kustom k250-4 Wiring
Goto Forum:
  


Current Time: Thu Mar #d 05:43:45 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.