VintageKustom.com: Replacement Part Suggestions

Home » VintageKustom.com » Replacement Part Suggestions » need part

Show: Today's Messages :: Polls :: Message Navigator

Re: need part [message #11607 is a reply to message #11605]

Wed, 12 August 2009 15:04

chicagobill
Messages: 2005
Registered: April 2003

Senior Member

Welcome to the place!

The PC5065 is the basic 125 watt power amp board that was used in many of the later Kustom heads, like the 250 metal front amps. The only source that I know of is to salvage the board from another amp.

How badly burned is the board you're working on? Or are you thinking it would be easier to swap out a board than to replace individual parts?

Report message to a moderator

[Message index]

		need part By: cassent5150 on Wed, 12 August 2009 12:30
		Re: need part By: chicagobill on Wed, 12 August 2009 15:04
		Re: need part By: cassent5150 on Wed, 12 August 2009 16:01
		Re: need part By: pleat on Wed, 12 August 2009 21:51
		Re: need part By: stevem on Thu, 13 August 2009 06:02
		Re: need part By: cassent5150 on Fri, 14 August 2009 19:26
		Re: need part By: liquidator on Fri, 13 November 2009 17:07
		Re: need part By: chicagobill on Sat, 14 November 2009 11:34
		Re: need part By: cassent5150 on Sat, 14 November 2009 23:26
		Re: need part By: liquidator on Sat, 14 November 2009 13:40
		Re: need part By: pleat on Sat, 14 November 2009 18:02
		Re: need part By: liquidator on Sat, 14 November 2009 18:49

Previous Topic:	Kustom Studio 4-valve rebuild
Next Topic:	replacement filter caps

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed May 15 03:34:09 EDT 2024

.:: Contact :: Home ::.