VintageKustom.com: Replacement Part Suggestions

Re: need part [message #12373 is a reply to message #12361]

Sat, 14 November 2009 23:26

cassent5150
Messages: 341
Registered: August 2009

Senior Member

Thanks for all the wonderfull info and help everyone on this sight has been. I found another kustom XII srs on ebay for parts and used a board out of it. Its made a couple of shows with 2- Kustom BI-AMP roll cabs I have and it kicks. Quite the tank to haul around tho I might add. Thanks for the schematics also. I've fixed my Kasino 250 bass head. I now have 6 k-200B-5's going strong. Still aint figured out the K-150-2 I'm stumped. Where is the low voltage supply comeing from on the the lower channel? The head has 2 channels one over the top of the other and the lower channel has very little signal getting threw and also the Trem/Vabra doesn't work. Top channel is strong and the reverb works. If someone has the schematics for this unit and can kind of email me them and even better circle the parts that may be the problem I would be very thankfull. Steve C. at cassent5150@hotmail.com

Steve C

Report message to a moderator