so..... i have what i believe to be a '68-'69 k-100
so here we go
first off one input jack plate in rear of the unit is missing (directly under the dual monitor/tape mix on right side) and i was wondering what it was so i could make a new plate.
secondly and most importantly ive been getting the run around on the two column speakers that went with this head (one being blown if i can get them)
so my first question regarding the speakers is how can i run this right now if it checks out and functions properly.
and lastly if i get the orig. column speakers what were they loaded with so i can replace the blown column...or what is a good modern replacement comprable to the old tone?
any help would be GREATLY apppreciated as i can find virtually no info on this equiptment.
thanks in advance,
dave