VintageKustom.com: Repairing Kustom Amps » K200 issue

Home » VintageKustom.com » Repairing Kustom Amps » K200 issue (Distortion)

Show: Today's Messages :: Show Polls :: Message Navigator

Return to the default flat view

Create a new topic

Submit Reply

K200 issue [message #15944]

Mon, 11 July 2011 07:40

cassent5150 is currently offline

cassent5150
Messages: 341
Registered: August 2009

Senior Member

I'm working on a K200 frank (6 transistor with reverb/tremolo).
I've gone through the output section and its working fine. I went through the pre amp board and independently they both work great. Here's my dilema, I get a distorted signal if I run the 2 output wires of the pre amps together. I have another amp (595 with no effects) and using it as a clone I add in the resistor R146 on PC 101 to connect the 2 pre amp signals together and the output at the gray wire is distorted. Again I have a clean signal from both channels seperatlly but they distort if I combine them? Anyone got any clues as to what to do?

Steve C

[Updated on: Mon, 11 July 2011 07:41]

Report message to a moderator

Send a private message to this user

[Message index]

		K200 issue By: cassent5150 on Mon, 11 July 2011 07:40
		Re: K200 issue By: chicagobill on Mon, 11 July 2011 11:58
		Re: K200 issue By: cassent5150 on Mon, 11 July 2011 18:36
		Re: K200 issue By: stevem on Mon, 11 July 2011 19:20
		Re: K200 issue By: cassent5150 on Mon, 11 July 2011 19:49
		Re: K200 issue By: chicagobill on Tue, 12 July 2011 12:14
		Re: K200 issue By: cassent5150 on Tue, 12 July 2011 20:21
		Re: K200 issue By: chicagobill on Wed, 13 July 2011 17:24
		Re: K200 issue By: cassent5150 on Wed, 13 July 2011 18:14
		Re: K200 issue By: cassent5150 on Wed, 13 July 2011 23:26
		Re: K200 issue By: chicagobill on Thu, 14 July 2011 11:02
		Re: K200 issue By: cassent5150 on Thu, 14 July 2011 11:17

Previous Topic:	Pop sounds with a k-250 when switching off? Plus a bit of hiss at all times...
Next Topic:	model 695PA serial # 3278

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

PDF

]

Current Time: Thu Apr #d 07:26:11 EDT 2024

.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.