bluezebra Messages: 89 Registered: February 2014 Location: Lafayette, LA
Member
Thanks Pleat
The head came without a serial number plate from a flea market. It was not working and needed a "lot". I got it going, but there is no Model number on front. It's one of those '67 Kustom by Ross, Inc. ones. I called it the K400 because that's the model associated with the three boards on the inside: a PC702, PC501, and two PC102's. I didn't think it was 200 watts, but I finding out schematics and information on these amps are all over the place.
I do remember the most bragged about feature of buying one back in the sixties/seventies....."Lifetime warranty"...!
It has twelve pleats across the top making it 24 inches and yes a 2x12 or 2x10 would be nice. Any further information would be appreciated.