VintageKustom.com: Replacement Part Suggestions » Help with a Kustom 100 SC amplifier.

Help with a Kustom 100 SC amplifier. [message #20203]

Thu, 20 February 2014 17:35

slavestate
Messages: 3
Registered: February 2014
Location: NYC

Junior Member

Hello there.

I recently acquired a Kustom 100 amplifier that started its life as a 100 SC 1x15 combo. It looks as if the original speaker was swapped out at some point so I'm not too sure what the exact model was. The cabinet is black in color and the speaker in it now has some issues and needs to be replaced. I'm thinking of instead of making this a combo either sourcing a head shell cabinet for the amplifier, or if that fails making one from scratch. I've made several replacement amplifier head shell cabinets before so it will be no problem, other than it will be covered in basic black tolex, not tuck 'n roll.

So the measurements of my amplifier chassis are as follows: 26"w x 5 1/4"h x 9 1/2"d. I'm wondering if anyone on here has a cabinet they'd be willing to sell, or perhaps a busted up Kustom 100 that I could scavenge to use as parts.

I'm not 100% sure, but this particular amplifier I have is a bit wider than most I've seen. Anyways, any help is greatly appreciated!

Thank you for your time.

http://i838.photobucket.com/albums/zz306/phaseshifterband/DSC_0579_zps6a4d3e74.jpg

Report message to a moderator