Home » VintageKustom.com » Replacement Part Suggestions » FOOT SWITCH QUESTION (4 PIN XLR )
FOOT SWITCH QUESTION [message #20243] Tue, 04 March 2014 10:20 Go to previous message
GENO6860 is currently offline  GENO6860
Messages: 3
Registered: March 2014
Junior Member
Hello, I am looking at an Kustom amp head that has the Harmonic Clipper on it. There is not a model number on the front as my K-200 or my K-150 Combo has. The tag on the back is stamped in the MODEL zone: 3-15L-4. The owner says he cannot test the effects (Trem, Harmonic Clipper) as he doesn't have the foot switch. The back has the 4 pin XLR plug (female) in it. I have seen one 4 pin wiring diagram on the forum here that is: Switchcraft A4M plug should work.
Pin 1 = ground
Pin 2 + Positive voltage for the lights on the lighted footswitch.
Pin 3 = Trem/Vib
Pin 4 = Reverb

My question is how would a feller wire a set-up that does the switching on this amp?

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Help with a Kustom 100 SC amplifier.
Next Topic: K150 K250 K300 K600 Switch Replacement
Goto Forum:
  

[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Thu Apr #d 08:02:54 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.