VintageKustom.com: Repairing Kustom Amps » INFO NEEDED PC900

Home » VintageKustom.com » Repairing Kustom Amps » INFO NEEDED PC900 (Trying to repair K100C-8 with hacked up PC900)

Show: Today's Messages :: Show Polls :: Message Navigator

Return to the default flat view

Create a new topic

Submit Reply

INFO NEEDED PC900 [message #20269]

Fri, 07 March 2014 16:20

UB1LID is currently offline

UB1LID
Messages: 6
Registered: March 2014
Location: NY

Junior Member

Hi All,

If anyone has a photo they can share via email or such of the PC900 it would be greatly appreciated. The areas of concern are the 8 volt reg's and what the devices are that came from the factory. The devices in this unit now are not original or even close. Nor are the drivers. A resistor in the 8 volt reg was solder blobbed on the underside of the board and I would need the correct value for that as well. There is a string of two diodes with one intentionally shorted with a wire for some reason unknown to me. Anyway, I need to get this straightened out so that I can troubleshoot a non-functioning tremolo.

Thanks,

Lid

Report message to a moderator

Send a private message to this user

[Message index]

		INFO NEEDED PC900 By: UB1LID on Fri, 07 March 2014 16:20
		Re: INFO NEEDED PC900 By: chicagobill on Fri, 07 March 2014 17:07
		Re: INFO NEEDED PC900 By: UB1LID on Fri, 07 March 2014 18:40
		Re: INFO NEEDED PC900 By: stevem on Sat, 08 March 2014 06:53
		Re: INFO NEEDED PC900 By: UB1LID on Sat, 08 March 2014 07:18
		Re: INFO NEEDED PC900 By: stevem on Sat, 08 March 2014 08:29
		Re: INFO NEEDED PC900 By: UB1LID on Sat, 08 March 2014 08:35
		Re: INFO NEEDED PC900 By: UB1LID on Sat, 08 March 2014 10:18
		Re: INFO NEEDED PC900 By: chicagobill on Sat, 08 March 2014 12:15
		Re: INFO NEEDED PC900 By: UB1LID on Sat, 08 March 2014 19:47
		Re: INFO NEEDED PC900 By: stevem on Sun, 09 March 2014 07:26

Previous Topic:	Kustom lead II
Next Topic:	K250-1 Knob Removal

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

PDF

]

Current Time: Fri Apr #d 04:17:46 EDT 2024

.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.