Home » VintageKustom.com » Replacement Part Suggestions » K200-B1 Replacement output transistors (necesito reemplazar los transistores de salida pero no tienen numero)
Re: K200-B1 Replacement output transistors [message #20436 is a reply to message #20431] Mon, 07 April 2014 06:39 Go to previous messageGo to previous message
stevem is currently offline  stevem
Messages: 4728
Registered: June 2004
Location: NY
Senior Member
PNP type transistors can not be used in these amps without massivly reworking the driver circuit board on the rear wall of the amp.
Like Bill posted for you the transistors are 2N3055 which are NPN type.
I use NTE130 transistors for these most of the time.
Since the amp has been fitted with the wrong output transistors I would check all 4 of the box type 5 watt emitter resistors and I would also check all 4 of the boxed heatsinked driver transistors.

If you got look at the Technical to the left of the screen here we have the schematics you are asking about.
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Equivalent Transistor
Next Topic: where to get upgraded mail filters & spl drivers 250 kustom
Goto Forum:
  


Current Time: Fri Mar #d 07:27:06 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.