VintageKustom.com: Replacement Part Suggestions

Home » VintageKustom.com » Replacement Part Suggestions » K-400b update (speaker configuration)

Show: Today's Messages :: Show Polls :: Message Navigator

Re: K-400b update [message #20852 is a reply to message #20815]

Mon, 30 June 2014 17:47

Iowa Boy
Messages: 767
Registered: June 2014

Senior Member

The work at fixing the speaker board is nothing.....do you think $150 is too much for two vintage Altec horns?

What about the 16 ohm cross-over.....Parts Express only showed 8 and a couple of 4's. These horns at least look close to what I have seen on the older Kustoms. Did see one on Ebay that claimed to be out of a 2 X 15 Kustom but was asking about $200 and no mention of driver.

Report message to a moderator

[Message index]

		K-400b update By: Iowa Boy on Sat, 28 June 2014 11:25
		Re: K-400b update By: pleat on Sat, 28 June 2014 16:25
		Re: K-400b update By: stevem on Sat, 28 June 2014 16:41
		Re: K-400b update By: Iowa Boy on Sat, 28 June 2014 17:37
		Re: K-400b update By: pleat on Sat, 28 June 2014 17:54
		Re: K-400b update By: Iowa Boy on Sun, 29 June 2014 02:57
		Re: K-400b update By: Iowa Boy on Sun, 29 June 2014 14:06
		Re: K-400b update By: Iowa Boy on Sun, 29 June 2014 19:13
		Re: K-400b update By: Iowa Boy on Mon, 30 June 2014 16:14
		Re: K-400b update By: pleat on Mon, 30 June 2014 16:56
		Re: K-400b update By: braud357 on Mon, 30 June 2014 17:18
		Re: K-400b update By: Iowa Boy on Mon, 30 June 2014 17:47
		Re: K-400b update By: stevem on Tue, 01 July 2014 06:37

Previous Topic:	K 400b-4
Next Topic:	Cab Insulation

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Apr #d 22:21:50 EDT 2024

.:: Contact :: Home ::.