Home » VintageKustom.com » Repairing Kustom Amps » Frankenstein Head recap- please help!
Re: Frankenstein Head recap- please help! [message #22096 is a reply to message #22095] Thu, 15 January 2015 02:48 Go to previous messageGo to previous message
chicagobill
Messages: 2005
Registered: April 2003
Senior Member
Welcome to the place. What sort of noises is the amp making?

The original tank was a full length Accutronics tank, so if you have a short tank, it has been replaced. The Frank head didn't have any Molex connectors, so if your amp has some, they have been added as well. If you describe what the connectors are connected to it might help to figure out why they were added in.

I am not a fan of recapping unless the caps are bad, but the 7500uF caps will work as replacements. I would suggest fixing up the problems with the amp before doing the caps, so that you don't add to the problems before figuring them out.

Again, welcome.
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Wrecked speaker jack
Next Topic: Gold to Silver
Goto Forum:
  


Current Time: Sat Apr #d 22:33:04 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.