VintageKustom.com: Repairing Kustom Amps

Wed, 28 January 2015 22:47

twault
Messages: 13
Registered: January 2015
Location: belmont, oh

Junior Member

Ok. So, I bought 2 Kustom 300 heads for $125. One works. One assumed not. The power cord was cut on the non-working one. I planned on rewiring it and expecting a fuse to blow or an explosion to occur. As it turns out, I rewired a cord, and it works...sort of. Input 1 and 2 work. 3-6 do not. Where do I start? Also, is the polarity switch a big deal? There is a white connecter that doesn't seem to want to fit down in the switch, but I can't get my fat fingers in there without unplugging the board. I can't tell if it is broken or just apart. I didn't have much time to test after the rewire tonight, I was just happy it was somewhat working.

I'm here to kick ass and chew bubblegum, and I'm all out of bubblegum.

Report message to a moderator