Home » VintageKustom.com » Repairing Kustom Amps » Weak signal (one side) (Troubleshooting )
Weak signal (one side) [message #24077] Tue, 27 October 2015 16:52 Go to previous message
Fatstrat1991 is currently offline  Fatstrat1991
Messages: 6
Registered: October 2015
Location: Louisiana
Junior Member
What's up guys? Newbie here to the forum. I'm currently trying to repair a Kustom K100 C-8. The left input works just fine, the right side doesn't. The right side inputs are going to a preamp PC1400. I took the output from the other preamp and wired it to the power amp where the 1400 is supposed to go in, and once again, works perfectly. Leading me to believe the problem is somewhere on the PC1400. With a guitar into the side that doesn't work, if I turn the volume pot to about 9 o'clock I can get a very faint sound, but anything above or below that is silent. I thought it might be the pot, but I took an ohm reading and it measured from 0-15K just like I assumed it should. Any idea what could be going wrong here? Thanks for any help

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: K200-1 head
Next Topic: Clean grill cloth and speaker impedance for K200 x3
Goto Forum:
  

[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Sat Apr #d 18:46:21 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.