VintageKustom.com: Repairing Kustom Amps

Home » VintageKustom.com » Repairing Kustom Amps » repairing k150-8 plexi (troubleshooting blowing fuses)

Show: Today's Messages :: Show Polls :: Message Navigator

repairing k150-8 plexi [message #24179]

Sat, 28 November 2015 10:13

natedriver
Messages: 35
Registered: March 2009

Member

I have a k150-8 plexi head that is blowing fuses. I built a bulb limiter. I am getting 55v and -55v off the filter caps. the schematic for board 5032 shows 39.5v and -39.5v.
Am I missing something here? Any help would be appreciated before I move foward with trouble shooting the power amp board thanks. Nate

Report message to a moderator

[Message index]

		repairing k150-8 plexi By: natedriver on Sat, 28 November 2015 10:13
		Re: repairing k150-8 plexi By: chicagobill on Sat, 28 November 2015 12:19
		Re: repairing k150-8 plexi By: natedriver on Sat, 28 November 2015 12:53
		Re: repairing k150-8 plexi By: chicagobill on Sat, 28 November 2015 21:33
		Re: repairing k150-8 plexi By: stevem on Sun, 29 November 2015 07:29
		Re: repairing k150-8 plexi By: natedriver on Sun, 29 November 2015 09:49
		Re: repairing k150-8 plexi By: stevem on Sun, 29 November 2015 11:03
		Re: repairing k150-8 plexi By: natedriver on Sun, 29 November 2015 11:22
		Re: repairing k150-8 plexi By: stevem on Sun, 29 November 2015 11:56
		Re: repairing k150-8 plexi By: natedriver on Sun, 29 November 2015 12:14
		Re: repairing k150-8 plexi By: chicagobill on Sun, 29 November 2015 14:11
		Re: repairing k150-8 plexi By: stevem on Sun, 29 November 2015 14:22
		Re: repairing k150-8 plexi By: natedriver on Sun, 29 November 2015 14:27
		Re: repairing k150-8 plexi By: stevem on Mon, 30 November 2015 06:30
		Re: repairing k150-8 plexi By: natedriver on Mon, 30 November 2015 07:32
		Re: repairing k150-8 plexi By: stevem on Mon, 30 November 2015 08:13
		Re: repairing k150-8 plexi By: natedriver on Mon, 30 November 2015 08:32
		Re: repairing k150-8 plexi By: natedriver on Mon, 04 January 2016 13:50
		Re: repairing k150-8 plexi By: chicagobill on Mon, 04 January 2016 15:00

Previous Topic:	Frankenstein Head: replacement cap values
Next Topic:	Kustom 200 A-4 (Earlier)

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Apr #d 13:49:44 EDT 2024

.:: Contact :: Home ::.